Description

SHIELD® VALORPREMIUM FULL-SYNTHETIC PASSENGER CAR ENGINE OILPhillips 66® Shield Valor Full Synthetic Motor Oil is a premium quality, full-synthetic automotive engine oil designed to provide maximum engine protection for both turbocharged gasoline direct injection, conventional gasoline-fueled and flex-fueled passenger cars and light trucks under all operating conditions. It is particularly recommended for vehicles operating at extreme temperatures or under severe driving conditions, such as towing heavy loads.Helps protect against low speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines (TGDI)Exceeds ILSAC GF-6 requirements for new cars under warrantyEnhanced performance benefits at extreme temperatures compared with conventional engine oilsOutstanding resistance to viscosity and thermal breakdown at high temperaturesProtects against sludge and varnish formationProtects against rust and bearing corrosionLow volatility for reduced oil consumptionExcellent low temperature pumpability for protection during cold startsHighly resistant to foamingFormulated to protect turbochargers and emission control system catalystsTurbocharged gasoline direct injection, conventional gasoline-fueled and flex-fuel passenger cars, light trucks and sport utility vehicles, including gasoline-electric hybrids, especially when operating under severe conditionsFour-stroke cycle gasoline engines in other mobile or stationary equipmentLicensed for:ILSAC GF-6A, 0W-20, 5W-20, 5W-30, 10W-30ILSAC GF-6B, 0W-16API Service SP, SN PLUS with Resource ConservingGM dexos1® Gen3, 0W-20 and 5W-30Meets or exceeds the requirements of:Chrysler MS-6395 (except 0W-16)Ford WSS-M2C960-A1 (SAE 5W-20)Ford WSS-M2C961-A1 (SAE 5W-30)Ford WSS-M2C962-A1 (SAE 0W-20)GM6094M (obsolete specification) (does not include 0W-16)

@ (°C)(-35)

Cold Cranking Viscosity, cP5,700

Color, ASTM D15003.0

cSt @ 100°C8.0

cSt @ 40°C42

Density, lbs/gal @ 60°F7.05

Flash Point (COC), °C (°F)226 (439)

High Temp/High Shear Viscosity, cP @ 150°C2.6

Phosphorus, wt %0.068

Pour Point, °C (°F)-45 (-49)

SAE Grade0W-20

Specific Gravity @ 60°F0.845

Sulfated Ash, ASTM D874, wt %0.8

Total Base Number (TBN), ASTM D28967.9

Viscosity Index169

Viscosity, Kinematic